Plustherm - your induction solution finder
  • Home
  • Applications
    • Induction Annealing
    • Induction conductor Preheating
    • Epitaxy
    • Induction Brazing / Soldering
    • Induction Tempering / Hardening
    • Induction Melting
    • Induction Shrinking / Stretching
  • Products
    • Induction Generators >
      • TNX Compact
      • TNX Flex
      • TNX Standard
      • TNX Industrial
    • Customized Solutions
    • Induction coil services
    • Accessories >
      • Water Re-Coolers / Chiller Units
      • CELEM Capacitors >
        • Guide to using Celem Capacitors
  • Service
    • Power Calculation
    • Power Electronics
    • Induction Heating for industrial applications
    • Evaluation of the required Heating Power
    • Inductor efficiency
  • Downloads
  • Company
    • About us
    • Contact
    • References
    • Fault report
    • Company Details
Picture
HOME > APPLICATIONS > Induction Tempering / Hardening

Induction Tempering / Hardening

Induction hardening is today the most economical method for hardening part of the workpiece surface. Thermo-chemical processes are more suitable for hardening the entire workpiece surface.

​The penetration depth of the thermal energy depends on the working frequency of the induction generator. The higher the working frequency, the smaller the penetration depth.

Advantages of induction heating:
  • Rapid operational readiness
  • treatment time in seconds
  • no scaling
  • Subsequent treatments (straightening, grinding and tempering) are no longer necessary
  • Consistent hardness quality
  • Problem-free integration into the automation process
  • High output

Plustherm has more than 50 years of experience in the field of induction hardening and is very familiar with this application.
​
For a feasibility study, you can send us your sample component without obligation for a hardening test. For questions or advice you will find our contact details here.

The following products are suitable as an induction hardening solution:
-> TNX Compact
-> TNX Standard
​-> TNX Industrial

​Applications


​​Induction Annealing
Induction Conductor Preheating
Epitaxy
Induction Brazing / Soldering
​Induction Tempering / Hardening
Induction Melting
Induction Shrinking / Stretching


​

​Service


​​Power Calculation

Spare Parts
Downloads

​Contact


​​Plustherm Point AG
Zentralstrasse 40
5242 Birr
Switzerland

​​Tel.  +41 (0) 56 426 80 81
Fax. +41 (0) 56 427 23 34
Mail: info@plustherm.ch
Web: www.plustherm.ch
  • Home
  • Applications
    • Induction Annealing
    • Induction conductor Preheating
    • Epitaxy
    • Induction Brazing / Soldering
    • Induction Tempering / Hardening
    • Induction Melting
    • Induction Shrinking / Stretching
  • Products
    • Induction Generators >
      • TNX Compact
      • TNX Flex
      • TNX Standard
      • TNX Industrial
    • Customized Solutions
    • Induction coil services
    • Accessories >
      • Water Re-Coolers / Chiller Units
      • CELEM Capacitors >
        • Guide to using Celem Capacitors
  • Service
    • Power Calculation
    • Power Electronics
    • Induction Heating for industrial applications
    • Evaluation of the required Heating Power
    • Inductor efficiency
  • Downloads
  • Company
    • About us
    • Contact
    • References
    • Fault report
    • Company Details