Plustherm - your induction solution finder
  • Home
  • Applications
    • Induction Annealing
    • Induction conductor Preheating
    • Epitaxy
    • Induction Brazing / Soldering
    • Induction Tempering / Hardening
    • Induction Melting
    • Induction Shrinking / Stretching
  • Products
    • Induction Generators >
      • TNX Compact
      • TNX Flex
      • TNX Standard
      • TNX Industrial
    • Customized Solutions
    • Induction coil services
    • Accessories >
      • Water Re-Coolers / Chiller Units
      • CELEM Capacitors >
        • Guide to using Celem Capacitors
  • Service
    • Power Calculation
    • Power Electronics
    • Induction Heating for industrial applications
    • Evaluation of the required Heating Power
    • Inductor efficiency
  • Downloads
  • Company
    • About us
    • Contact
    • References
    • Fault report
    • Company Details
Picture
HOME > SERVICE > Power Electronics

Power Electronics

Power electronics is considered a specific branch of electrical engineering where high electric currents and voltages are converted using special electronic control components.
Electronics are most commonly associated with signal and data processing. However, with power electronics the control and conversion of electrical energy is the primary objective. What is normal for all electronic components is that they are controlled and activated by electrical signals. Power electronics utilize these classic attributes whilst working in parallel with mechanically or electromagnetically activated switches and/or control elements.
We are specialists in the field of power electronics and make it a priority to stay current with the latest issues and developments. Much of our experience comes from years of manufacturing high frequency generators which operate between 1 kHz - 13.56 MHz and have varied power outputs of between 1 – 600 kW.

Our experience
  • Development and production of short-circuit-proof high-voltage sources (up to 60 kV)
  • Development and production of short-circuit-proof high-power sources (up to 6 MW)
  • Development and manufacture of high power sources up to 10 kA
  • Development and manufacture of high power sources up to 1 MW

Project example -> Trapezoidal Pulse Generator
High voltage, high power function generator @ 60 kVA. Creates triangle, trapezoid, and square-waves. Built for the research and development branch of ALSTOM Switzerland.
Bild

  • Voltage: 1.5kV – 15kV
  • Frequency: variable 100 Hz – 15 kHz
  • Slope: 0 – 20kV / µs
  • Load: 0 - 20nF capacitance (generator / motor winding to stator or rotor)
  • Modular design with high redundancy (central control compensates to 6 failed steps)
  • Fiber optic control and monitoring.


​Applications


​​Induction Annealing
Induction Conductor Preheating
Epitaxy
Induction Brazing / Soldering
​Induction Tempering / Hardening
Induction Melting
Induction Shrinking / Stretching


​

​Service


​​Power Calculation

Spare Parts
Downloads

​Contact


​​Plustherm Point AG
Zentralstrasse 40
5242 Birr
Switzerland

​​Tel.  +41 (0) 56 426 80 81
Fax. +41 (0) 56 427 23 34
Mail: [email protected]
Web: www.plustherm.ch
  • Home
  • Applications
    • Induction Annealing
    • Induction conductor Preheating
    • Epitaxy
    • Induction Brazing / Soldering
    • Induction Tempering / Hardening
    • Induction Melting
    • Induction Shrinking / Stretching
  • Products
    • Induction Generators >
      • TNX Compact
      • TNX Flex
      • TNX Standard
      • TNX Industrial
    • Customized Solutions
    • Induction coil services
    • Accessories >
      • Water Re-Coolers / Chiller Units
      • CELEM Capacitors >
        • Guide to using Celem Capacitors
  • Service
    • Power Calculation
    • Power Electronics
    • Induction Heating for industrial applications
    • Evaluation of the required Heating Power
    • Inductor efficiency
  • Downloads
  • Company
    • About us
    • Contact
    • References
    • Fault report
    • Company Details